Linux: RIPLinuX
 

Recovery Is Possible (RIP) is a Slackware-based CD or floppy boot/rescue/backup/maintenance system. It has support for a lot of filesystem types (Reiserfs, Reiser4, ext2/3, iso9660, UDF, XFS, JFS, UFS, HPFS, HFS, MINIX, MS DOS, NTFS, and VFAT) and contains a bunch of utilities for system recovery. It also has IDE/SCSI/SATA, PCMCIA, RAID, LVM2, and Ethernet/DSL/cable/PPP/PPPOE network support.

Архитектура процессора: i486
Cайт: [Для просмотра данной ссылки нужно зарегистрироваться]

You'll need at least 256MB of RAM and a 586 CPU to boot and use it.

You can write any bootable ISO below to a CD, using cdrecord etc.
You can also write any bootable ISO below (except the GRUB version)
to a USB flash drive.
Example: dd if=RIPLinuX-7.8.iso of=/dev/sdb bs=1M "Under Linux!"
Example: dd if=RIPLinuX-7.8.iso of=\\.\e: bs=1M "Under Windows!"
You'll loose anything on the USB flash drive, but any remaining space
on the drive can be used by using fdisk to create a second partition
and putting a Fat16/32 etc. filesystem on it.
There's a Windows version of "dd" below.
You can create a second partition on /dev/sdb by using "mkpart"
from RIPLinux
# mkpart 6 all /dev/sdb
# mkdosfs /dev/sdb2
The above example assumes your USB flash drive is on /dev/sdb.
The preferred method for putting RIPLinux on a USB flash drive is by
using the "mkusb" script below.

Bootable ISO (RIPLinuX-7.8.iso) < share.nnov.ru < 89mb



This is a PXE network version. unzip -L RIPLinuX-7.8.PXE.zip "Extract under Linux!"
RIPLinuX-7.8.PXE.zip < share.nnov.ru < 85mb



Read the USB readme for instructions on how to install
RIP on a USB flash drive.

Read the mkextlin readme for instructions on how to install
the Linux system on a USB flash drive partition. You can
then boot and use it the same as if it was installed
to a partition on a hard drive.

[Для просмотра данной ссылки нужно зарегистрироваться]
[Для просмотра данной ссылки нужно зарегистрироваться]
[Для просмотра данной ссылки нужно зарегистрироваться]
[Для просмотра данной ссылки нужно зарегистрироваться]

RIPlinux 8.9

[Для просмотра данной ссылки нужно зарегистрироваться]